Twister 2.0 Tubeless Tool

The Twister 2.0 Tubeless tool by MaXalami – ingenious to transport
The Twister 2.0 Tubeless tool by MaXalami combines the easy handling of the MaXalami Tubeless Repair System with an ingenious transport possibility. You can easily store the tool in your handlebars or bottom bracket. The Twister 2.0 was equipped with a high-quality aluminium handle and is therefore even more robust than its predecessor. The diameter of the wheel and the knurling have also been adjusted for better function. The Twister 2.0 is made in Germany and was used at the hardest MTB races in the world during the development phase. This confirms its robustness.
Technical Information:Application:tubeless tyresMaterial:steelHandle Material:aluminiumCompatibility:fits handlebars and bottom brackets with a 16 – 24 mm inner diameterInstructions:1. Thread the MaXalami into the insertion tool
2. Push twister in the hole and push it through until 5 mm are left on patch
3. Hold the MaXalami firmly and pull out the twister again
4. Done!
Contents:1 x MaXalami Twister 2.0 tool1 x elastomer adapter1 x washers3 x MaXalami Tubeless Repair strips