Specialized Turbo Levo SL Comp Carbon 29″ E-Mountain Bike

Specialized Turbo Levo SL Comp – Agile E-MTB for full power
The Specialized Turbo Levo SL Comp is a 29″ carbon e-bike with SRAM NX Eagle components that is as agile and lively as a mountain bike without support would be. It is not without reason that its geometry is based on that of the Stumpjumper, including the Sidearm Design on the rear triangle. With the Turbo Levo SL Comp you can go further, unleash even more power on the trail and experience maximum riding fun. This is because the ultra-light SL 1.1 motor with a 320 Wh battery always provides flawless support and does not show any additional resistance even when switched off. The e-bike was equipped with suspension elements from Fox Racing Shox and can be adjusted even more to your individual needs using the Specialized Mission Control App.
Information regarding the return of batteries and electrical equipment:Information on the return and disposal of used batteries and electrical equipment can be found here. For information regarding the return of used e-bike batteries, please contact our customer service.
Guidelines for Replacing E-bike Components:Before you replace components on your e-bike, please read through the guidelines for component replacement for CE-marked e-bikes/pedelecs with pedal assistance.
Specifications:Application:EnduroWheel Size:29″Front Travel:150 mmRear Travel:150 mmSizes:S, M, L, XLFront Triangle Material:carbon (11m)Rear Triangle Material:CarbonE-Motor:Type:mid-drive motorMotor Type:Specialized SL 1.1, 35 Nm (1.9 kg)Pedal Assist (max.):25 km/hPower:240 WBattery Type:Specialized SL1-320, fully integrated, 48 VCapacity:320 WhDisplay:Specialized TCU, 10-LED battery status, 3-LED ride mode, ANT+ / BluetoothComponents:Frame:Specialized Turbo Levo SL, FACT™ 11m full carbon, trail geometry, 12 x 148 mmFork:Fox Racing Shox Float 34 Rhythm, GRIP damper, Sweep-Adjust, 51 mm Offset, 111 mm Trail, Kabolt thru-axleStem:Specialized Trail, 6°, aluminium, 3D forged, 4 boltsHandlebars:Specialized Trail, 27 mm rise, aluminium 6061, 8° backsweep, 6° upsweep, 31.8 mmGrips:Specialized TrailRear Shock:Fox Racing Shox Float DPS Performance, 3-Position Adjustment, RX Trail Tune, 52.5 x 210 mmRemote System:noneHeadset:IS42/28.6 – IS52/40Seatpost:X-Fusion Manic, 34.9 mm, infinite adjust adjustable, 2-bolt head, cable guide from below, Remote SRL LE leverSaddle:Specialized Bridge Comp, hollow CrMo steel strutsCrank:Praxis Works M30 Custom, SRAM X-Sync Eagle, 94 BCD, 30 t chainringPedals:noneBrakes:SRAM Guide R, hydraulic disc brake, 200 mm/180 mmShift Lever:SRAM NX Eagle, Trigger, 12-speedRear Derailleur:SRAM NX Eagle, 12-speedCassette:SRAM NX Eagle, 12-speed, 11-50 tChain:SRAM NX Eagle, 12-speedRims:Roval 29, 30-622, without hooks, aluminium, Tubeless ReadySpokes:DT Swiss IndustryFront Hub:Specialized, sealed cartridge bearings, 15 x 110 mm, 28 holesRear Hub:Specialized, sealed cartridge bearings, 12 x 148 mm, 32 holesFront Tyre:Specialized Butcher, Grid Trail carcass, GRIPTON® rubber compound, 29″ x 2.3″Rear Tyre:Specialized Eliminator, Grid Trail carcass, GRIPTON rubber compound, 2Bliss Ready, 29″ x 2.3″Approved For:Weight Limit:125 kg (rider + gear)Rotor Size (max.):200 mmTyre Size (max.):29 x 2.6″Chainrings:1xChainring Size (max.):34 TFeatures:just like a Stumpjumper, but with a little more power: Sidearm frame with great, well-balanced stiffness and a 150 mm perfectly tuned suspension2x you: doubles pedalling power with up to 240 watts of additional supportresponsive, lightweight motor provides perfect support with its homogeneous torque curve, matching your normal cadenceno additional resistance when riding without supportcapacity is expandable to 480 Wh with a Range Extender (not included in the delivery)with 48 V chargerstandard tubes with SV / Presta valvesMission Control 2.0 App is available on the App Store or Google Play StoreTurbo Control Display (TCD) bicycle computer for mounting on the stem is available as an optional accessory

Technology:FACT™
FACT is an acronym for ” Functional Advanced Composite Technology” and summarises all the know-how that Specialized has in the use of carbon fibre. It is a holistic approach, which primarily concerns the bike frames, but is found in many components such as handlebars, stems, saddles etc. The starting point is always the awareness for the needs of riders and the capability to fulfil them. Next, the selection of fibres, resins and fabric layers takes place; in this process the quality of the carbon and the arrangement of the fibre layers play an important role. It is important to find the right set-up for the project at hand and the intended location or rather the area of application. It is often necessary to differentiate from model to model at several points. In the final step, attention is paid to processing the material in a way that allows the desired advantages in terms of low weight, rigidity and stability to be achieved.

FSR
The Specialized FSR linkage design is based