Rohloff Speedhub Cable Measurement Aids

The brass tubes are used for simple shift cable lengthening. The 165 mm version is intended for internal gear mechs, the 200 mm version for external gear mechs.
Use:Slide the bellows over the brass tube. Push the brass tube onto the pulled shift cable as far as it will go. Cut off the shift cable at the end of the brass tube. Hold the bellows in position and pull out the brass tube. Slide the bayonet tip onto the end of the shift cable and fasten.
Manufacturer Number:8713
Contents:1 x Rohloff 165 mm brass tube1 x Rohloff 200 mm brass tube