Michelin E-Wild Rear 29+ Folding Tyre

Guidelines for replacing E-bike components:Before you replace components on your e-bike, please read through the guidelines for component replacement for CE-marked e-bikes/pedelecs with pedal assistance.
Specifications:Application:EnduroProduct Line:CompetitionGround Conditions:hard, dry, mixed, softType:folding tyreTubeless System:Tubeless ReadyTechnical Information:Rubber Compound:E-GUM-XCarcass:60 tpi, 3 layersSidewall:SkinwallPuncture Protection:Gravity ShieldModels:29×2.6
Dimensions:29 x 2.6″ETRTO:66-622Air Pressure:1.5 – 4.0 barTube Recommendation:B6Manufacturer Number:920622Technology:Competition
The premium segment for professionals and intensive sporty riders.

E-Bike Ready (up to 25 km/h)
For normal pedelecs and e-bikes with pedal assistance up to 25 km/h, the legislator does not prescribe special tyres. But even on these bikes, loads and average speeds are higher than normal, so Michelin recommends certain tyres for use on e-bikes.

E-GUM-X
The new E-GUM-X compound consists of two components, one rubber compound on the tread and one on the sidewall, which provide extra grip. The tread pattern from the enduro series provides even stronger grip.

E-Save Battery
Reduces the rolling resistance and thus the energy consumption of your E-MTB.

Tubeless Ready
These tyres can also be ridden tubeless if a tubeless rim is used and the maximum inflation pressure indicated on the tyre sidewall is not exceeded. You also need an appropriate sealant and the tyre inflation pressure should be checked before every ride.
Contents:1 x Michelin E-Wild Rear 29+ folding tyre