Loctite 648 High-Strength Joint Adhesive

The 648 Joint Adhesive by Loctite – Ideal for joining clearance or press-fit joints
Loctite 648 is used for bonding cylindrical parts to be joined. The product cures in the absence of air between close-fitting metal surfaces and enables the transmission of higher forces and power in existing geometry and construction solutions. It achieves robust curing performances. The product can also be used on passive materials and achieves high temperature and oil resistance.
Specifications:Designation:LOCTITE 648Application:adhesiveTechnical Information:Strength: high
Gap Fill:up to 0.15 mmAlignment Time:3 minLap Shear Strength:27N/mm²Operating Temperature Range:-55 to +180 °CChemical Base:urethane methacrylateAppearance (Uncured):green, liquidFluorescence:yes, under UV lightComponents:1-component, no mixing requiredViscosity:low (500 mPas)Curing:anaerobicSecondary Hardening:activatorSpecific Thickness:1.1 at 25 °CSuitable Materials:metalsFeatures:high temperature resistanceproven tolerance to low levels of contamination from industrial oilshigh strength on all metals, even on passive materials (e.g. stainless steel)ideal for joining clearance or interference fit jointsHazardous Substance:
Signal Word:DangerHazardous Components:Bisphenol A, 2-EO-dimethacrylate, 3,3,5 trimethylcyclohexyl methacrylate, 2-hydroxyethyl methacrylate, acrylic acid, hydroxypropyl methacrylate, cumene hydroperoxide, maleic acid, 2′-phenylacetohydrazide, 2,2′-ethylenedioxy diethyl dimethacrylate, methacrylic acid
Hazard Warnings:H318 Causes serious eye damage.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H335 May cause respiratory irritation
H412 Harmful to aquatic life with long lasting effects.
Safety Information:P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P261 Avoid inhalation of vapours.
P273 Avoid release to the environment.
P280: Wear protective gloves/eye protection.
P302+P352 IF ON SKIN: Wash with plenty of water and soap.
P305+P351+P338 IN CASE OF CONTACT WITH EYES: Rinse carefully with water for several minutes. Remove contact lenses if possible. Continue flushing.
P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
P501 Dispose of waste and residues in accordance with local authorities and regulations.
Manufacturer:Henkel AG & Co. KGaA
Henkelstr. 67
40589 Düsseldorf
Germany
Tel.: +49 (211) 797 0
Fax: +49 (211) 798 4008
E-mail: [email protected]
Models:5 ml:
Nominal Amount:5 mlPackaging Type:dropper bottleManufacturer Number:195912Contents:1 x Loctite 648 joint adhesive