Dt-swiss X 1900 SPLINE 25 Centre Lock Disc 29″ Wheelset

DT Swiss X 1900 SPLINE 25 Center Lock Disc 29″ Wheelset for cross-country use
The X 1900 SPLINE 29″ wheelset from DT Swiss fits your cross-country bike. Especially if you are just starting out on a mountain bike or only ride occasionally, these tubeless-ready wheels with 25 mm jaw width are the right choice. The 370 SPLINE hub is designed for center lock brake rotors and has a Ratchet LN ratchet freehub. Thanks to 18 teeth, the pressure angle is only 20°, which makes wear particularly low and minimises unwanted idling. The straight pull spokes are combined with Pro-Lock Squorx nipples, which, in conjunction with the Sleeved Joint rim, results in stable wheels. This means nothing stands in the way of extended MTB tours.
Specifications:Application:Cross CountryWheel Size:29″Tyre Type:clincher tyreNumber of Spokes:28Brake Type:Center Lock DiscTubeless System:Tubeless ReadyTechnical Information – Rim:Type:X 432Rim Flange:with hookDimensions (ETRTO):25-622Inner Width:25 mmValve Hole Diameter:SV/Presta (6.5 mm)Rim Material:aluminiumTechnical Information – Front Hub:Type:370 SPLINEOver Locknut Dimension:15 x 100 mm thru-axleBody Material:aluminiumTechnical Information – Rear Hub:Type:370 SPLINEOver Locknut Dimension:12 x 142 mm thru-axleBody Material:aluminiumFreehub Body Material:aluminiumFreehub Body:Ratchet LN 18Technical Information – Lacing:Front Lacing Pattern:3-crossRear Lacing Pattern:3-crossSpoke Type:DT Champion, straight pullSpoke Material:steelNipple Type:DT Pro Lock SquorxNipple Material:aluminiumApproved For:Weight Limit:110 kg (system weight)Air Pressure (max.):see manufacturer’s specificationsRecommended Tyre Width:see manufacturer’s specificationsTechnology:Intended use – Category 3
Suitable for use on rough paved and unpaved ground, with a raised riding technique and occasional drops and jumps of approx. 60 cm.

Pro Lock
The nipple thread is coated with two-component adhesive to increase the durability of the wheels. It can still be re-trued several times without any problems, but the adhesive strength decreases slightly. The connection between the spoke and nipple cannot loosen by itself.

Ratchet LN
The Ratchet LN freehub is used to convert DT Swiss 370 hubs with pawls to a ratchet freehub. The advantage, compared to pawls, is the significantly larger contact surface with improved frictional connection. The seal attached to the freehub body, and not to the hub shell as usual, makes the freehub body easily replaceable. The modular design allows free selection of the engagement angle (18, 24, 36 or 54 teeth) and of the freehub body.

SPLINE
Straight pull hubs, straight spokes and strong rims result in a durable wheel. It can therefore be reliably used in training and competition.
Colour Info:black:
Rims: black with grey decalsHubs: blackSpokes: blackNipples: blackModels:29″ set (front 15×100 + rear 12×142) Shimano:
Freehub:Shimano MTBGearing:8-/9-/10-/11-speedManufacturer Numbers:W0X1900AEIXSA18970 (front) + W0X1900NEDLSA18971 (rear)
29″ set (front 15×100 + rear 12×142) SRAM XD:
Freehub:SRAM XDGearing:11-/12-speedManufacturer Numbers:W0X1900AEIXSA18970 (front) + W0X1900NEDRSA20529 (rear)Contents:1 x DT Swiss X 1900 SPLINE 29″ 25 Center Lock Disc wheelset (front and rear wheel)2 x DT Swiss tubeless valves2 x rolls DT Swiss tubeless rim tape