Cannondale Scalpel Carbon SE 2 29″ Mountain Bike

The Scalpel Carbon SE 2 29″ Mountain Bike by Cannondale for fast trail fun
The Cannondale Scalpel SE 2 mountain bike with 29″ tyres is a trail bike made of lightweight carbon with 120 mm travel front and rear. It is equipped with RockShox suspension components and a Shimano XT/Deore drivetrain. A striking feature is the flat FlexPivot area on the chainstay, which provides a low-maintenance pivot point. Despite the full suspension, there is not only room for two bottle cages in the frame triangle, but also for the Stash Kit mini-tool (not included), which can be mounted under one of the bottle cages. With the Scalpel SE you benefit from high grip and excellent traction on fast trails.
Specifications:Application:Cross Country, All MountainWheel Size:29″Front Travel:120 mmRear Travel:120 mmSizes:S, M, L, XLFront Triangle Material:CarbonRear Triangle Material:CarbonComponents:Frame:Cannondale Scalpel SE Carbon, carbon, Proportional Response Tuned, FlexPivot chainstay, Ai offsetFork:RockShox SID Select, DebonAir, 15 x 110 mm (Boost), 44 mm offsetStem:Cannondale 3, 6061 aluminium, 31.8 mm, 7°Handlebars:Cannondale 3 Riser, 6061 aluminium, 30 mm Rise, 8° Backsweep, 6° Upsweep, 780 mmGrips:Fabric FunguyRear Shock:RockShox SIDLuxe Select+, 2-Position Adjust, ReboundRemote System:noneHeadset:Integrated Sealed Bearing, taperedSeatpost:Cannondale DownLow Dropper, internal cable routing, 31.6 mm, travel: 100 mm (S), 125 mm (M, L), 150 mm (XL)Saddle:fabric Scoop Shallow Sport, steel railsCrank:Cannondale 1, BB30a, OPI SpideRing, 32 teeth, Ai OffsetPedals:noneBrakes:Shimano MT501 hydraulic, RT64 brake rotors, 180 mm (front) / 160 mm (rear)Shift Lever:Shimano Deore M6100, 12-speedRear Derailleur:Shimano XT, 12-speedCassette:Shimano Deore M6100, 10-51 teeth, 12-speedChain:Shimano Deore 6100, 12-speedRims:NoTubes Crest D, 32 holes, tubeless readySpokes:DT Swiss FactoryFront Hub:Shimano MT400, 15 x 110 mmRear Hub:Shimano MT410, 12 x 148 mmFront Tyre:Maxxis Ardent Race, 29 x 2.35″ , EXO, tubeless readyRear Tyre:Maxxis Recon Race, 29 x 2.35″ , EXO, tubeless readyApproved For:Rotor Size (max.):203 mm (front), 180 mm (rear)Tyre Size (max.):29 x 2.4″Chainrings:1xFork Axle to Crown Size (max.):532 mmFeatures:Proportional Response geometry concept: chainstay lengths, frame design and damping behaviour are matched to frame sizegeometry for grip, traction and high-efficiency propulsionmount for Stash Kit Mini-tool, fits under the bottle cagetwo bottle holdersSpeed-Release thru-axle for easy wheel changeOPI SpideRing: 3D forged for weight savings and increased stiffness and durabilityTechnology:Ai Offset
Asymmetric integration (Ai) places the drivetrain 6 mm further out than original drivetrains with 142 mm rear wheel over locknut dimension and 3 mm further out than standard 148 mm configurations. This is achieved through an asymmetrical rear triangle. This results in increased tyre clearance, not only but also when using a front derailleur. This in turn allows for shorter chainstays, which brings high traction and nimble handling. Furthermore, there are advantages in the rear wheel construction: the spokes on the left and right have the same length, tension and angle, so you benefit from a wheel that is up to 60% stiffer without having to compromise. To implement the offset, the chainring is also set further the outside.

FlexPivot
The FlexPivot construction is clearly recognisable by the striking flat areas of the chainstays. These not only serve to save weight, but also provide a virtual Horst link pivot point. The advantages compared to a classic pivot with ball bearings are obvious: FlexPivot is lighter, stiffer, durable and requires no maintenance.

OPI
One Piece Integration (OPI) refers to a 3D forging technology that makes it possible to produce components from one part in several steps, which are traditionally made up of several parts joined together.
Geometry:S:
Recommended Height:154 cm – 165 cmStack:592 mmReach:404 mmSeat Tube Length:430 mmTop Tube Length:580 mmEffective Top Tube Length:531 mmHead Tube Length:95 mmChainstay Length:436 mmWheelbase:1125 mmBottom Bracket Height:344 mmBB Drop:32 mmSeat Tube Angle:74°Head Tube Angle:67°Standover Height:755 mmStem Length:70 mmHandlebar Width:780 mmCrank Arm Length:170 mm
M:
Recommended Height:162 cm – 175 cmStack:602 mmReach:424 mmSeat Tube Length:440 mmTop Tube Length:602 mmEffective Top Tube Length:553 mmHead Tube Length:105 mmChainstay Length:436 mmWheelbase:1148 mmBottom Bracket Height:344 mmBB Drop:32 mmSeat Tube Angle:74°Head Tube Angle:67°Standover Height:755 mmStem Length:70 mmHandlebar Width:780 mmCrank Arm Length:175 mm
L:
Recommended Height:172 cm – 182 cmStack:611 mmReach:444 mmSeat Tube Length:480 mmTop Tube Length:625 mmEffective Top Tube Length:577 mmHead Tube Length:115 mmChainstay Length:436 mmWheelbase:1172 mmBottom Bracket Height:344 mmBB Drop:33 mmSeat Tube Angle:74°Head Tube Angle:67°Standover Height:755 mmStem Length:80 mmHandlebar Width:780 mmCrank Arm Len