Brunox Turbo-Spray

Brunox Turbo Spray is a lubricant, corrosion protection, penetrating oil, maintenance and contact spray all in one. It is suitable for lubricating and freeing moving parts on bicycles as well as in many other areas of application.

Specifications:Designation:BRUNOX® Turbo Spray® (AEROSOL)Application:LubricantFeatures:all-round spray for bicycle, home, workshop, garden…lubricant: forms transparent, non-hardening lubricating film for lasting lubricationpenetrating oil / rust remover: creeps into the finest hairline cracks and gaps, loosens seized screwscorrosion inhibitor: reliable protection for 3 to 6 monthscare/service spray: creeps under mineral dirt and dissolves organic dirt, aluminium, chrome, stainless steel, copper and brass carecontact spray: displaces moisture in apparatus and on circuit boards to prevent leakage currents, dissolves impurities on contact surfacesreliable lubricating effect down to -50 °C, flash point 78 °C, layer thickness 1 – 2 µmfree of silicone, PTFE, graphite, nano particlesno resinificationApplication:Brunox Turbo Spray should be sprayed on evenly and generously. This process should be repeated if necessary. Use spray tubes for parts that are difficult to access. If necessary, repeat the process from time to time to maintain the full effect.
In general, Brunox Turbo Spray does not need to be removed before further processing of the parts (exception: paintwork). No valves need to be sprayed empty. Brunox Turbo Spray can be removed without problems with washing-up liquids (surfactants).
Hazardous Substance:
Signal Word:WarningHazardous Components:Distillates (petroleum), light hydrotreated
Hazard Warnings:H223-H229 Flammable aerosol. Pressurized container: may burst if heated.
EUH066 Repeated exposure may cause skin dryness or cracking.
Safety Information:P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P103 Read label before use.
P210 Keep away from heat, hot surfaces, sparks, naked flames and other sources of ignition. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P410+P412 Protect from sunlight. Do not expose to temperatures above 50 °C / 122 °F.
Manufacturer:BRUNOX Korrosionsschutz GmbH
Adlzreiterstrasse 13, 85051 Ingolstadt
PO Box 100127, 85001 Ingolstadt
Germany
Tel.: + 49/ (0) 841 961 29 04
Fax: + 49/ (0) 841 961 29 13
E-mail: [email protected]
Web: www.brunox.de
Models:100 ml:
Nominal Amount:100 mlPackaging Type:spray canManufacturer Number:BR0,10TS
400 ml:
Nominal Amount:400 mlPackaging Type:spray canManufacturer Number:BR0,40TSContents:1 x Brunox Turbo-Spray