Brunox Top-Lock Fitting Spray

The Top-Lock Fitting Spray by Brunox – No gumming or icing up
Brunox Top-Lock maintains, lubricates and protects locks, hinges and fittings down to -52°C. It contains no silicones, PTFE or graphite and is therefore ideal for installation, maintenance or repair of locking systems, locking cylinders, fittings, locks, hinges, windows and doors. If locking cylinders are already blocked, Brunox Top-Lock is used. It has very good creep properties, meaning gumming is dissolved without residue.
Specifications:Designation:BRUNOX® Top-Lock® (AEROSOL)Application:LubricantFeatures:excellent hardware spray for window, cylinder and locking systemsingenious all-rounder for window and door fittings, window hinges, roller shutters etc.makes everything move fluidly again, protects against wear and corrosionfor maintaining drawer hinges, sliding, folding and pivoting devices of all kindsremoves even the worst blockages and squeaking noises, displaces moisturewith regular use, lock cylinders are reliably protected against icing, resinification and corrosionreliable lubricating effect down to -52 °Cfree of silicone, PTFE, graphite, nano particlesexcellent contact spray, ideally suited for electronic locking systemsApplication:Brunox Top-Lock can be applied with pinpoint accuracy, e.g. in the keyhole, thanks to the 2-W-Click. It is also always helpful to mist the key all over – this is done with the return click. The spray is directed at the key, which can then be cleaned with a cloth. Another spray is directed at the key before it is inserted into the lock. If locking systems or cylinders are very dirty, possibly already corroded, repeat the process until the key can be turned with ease.
Note from the manufacturer:No impairment of non-ferrous metals, non-metallic materials, paint, rubber and almost all plastics. The following plastics are excluded: PPO, PBT & PPE.
Hazardous Substance:
Signal Word:WarningHazardous Components:Distillates (petroleum), light hydrotreated
Hazard Warnings:H223-H229 Flammable aerosol. Pressurized container: may burst if heated.
EUH066 Repeated exposure may cause skin dryness or cracking.
Safety Information:P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P103 Read label before use.
P210 Keep away from heat, hot surfaces, sparks, naked flames and other sources of ignition. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P410+P412 Protect from sunlight. Do not expose to temperatures above 50 °C / 122 °F.
Manufacturer:BRUNOX Korrosionsschutz GmbH
Adlzreiterstraße 13, 85051 Ingolstadt
PO Box 100127, 85001 Ingolstadt
Germany
Tel.: + 49 / (0) 841 961 29 04
Fax: + 49 / (0) 841 961 29 13
E-mail: [email protected]
Web: www.brunox.de
Models:100 ml:
Nominal Amount:100 mlPackaging Type:spray canManufacturer Number:BRD0,10Top-LockContents:1 x Brunox Top-Lock fitting spray