AS-R Corrosion Inhibitor

AS-R corrosion inhibitor by FLUID FILM – protects against rust and corrosion
The AS-R corrosion inhibitor by FLUID FILM is an environmentally friendly lanolin-based rust protection agent with which you can maintain and protect your bicycle. Especially in winter a good corrosion protection is important for your bike. FLUID FILM is extremely weather-resistant and can even withstand snow and slush and, above all, the grit used. But this rust protection is also ideal for wintering your bike. Even a thin film protects your chain from corrosion, for example. Of course you can also protect your bike with FLUID FILM for the rest of the year. As it creeps quickly and still adheres well, your bike is equipped with a strong protective film in no time at all.
Specifications:Designation:FLUID FILM SprayApplication Area:Corrosion inhibitorFeatures:environmentally friendly based on lanolin (wool wax)solvent freecan be easily removed with petrol and other degreasing agentsweather-resistant also against snow, slush and the dissolving salts used against itrust solvent and water displacing corrosion inhibitor in oneexcellent resistance to salt watercorrosion protection for steel and other metal partsfast creeping, good adhesion, temperature stabledoes not evaporate and resinifyApplication:spray evenly onto clean dry or damp surfacerepeat application if necessarycan sprays in any orientationcoat hard-to-reach areas with the aid of the spray head with tube
Manufacturer’s Warning:Container is under pressure, protect from heating above 50 °C (e.g. sunlight). Do not open by force or burn after use. Do not spray against flames or other ignition source. Store in a cool and dry place.CLP Regulation Label:
Signal Word:DangerHazardous Components:Propane, butane
Hazard Warnings:H222-H229 Extremely flammable aerosol. Pressurized container: may burst if heated.
Safety Information:P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, naked flames and other sources of ignition. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P260 Do not inhale aerosol.
P280 Wear protective gloves / protective clothing / eye protection / face protection.
P410+P412 Protect from sunlight. Do not expose to temperatures above 50 °C.
P501 Dispose the contents/container in hazardous waste collection.
Manufacturer:Alfred Hodt Korrosionsschutz GmbH
Flurstraße 8
21465 Wentorf bei Hamburg
Tel.: +49 (0)40 72904030
Fax: +49 (0)40 72904059
[email protected]
www.hodt.de
Type:400 ml:
Nominal Amount:400 mlPackaging Type:spray canManufacturer Number:400304Contents:1 x FLUID FILM AS-R corrosion inhibitor